Fertigation means delivering nutrients through your irrigation water. Hoffgreen's EZ-FLO systems do it automatically — no power, no pumps, no measuring. Here's how the whole thing works.
Instead of spreading granules or mixing up a watering can, fertigation dissolves nutrients into the water your plants already receive. Every watering becomes a light, even feed.
The EZ-FLO tank sits inline with your tap or irrigation. As water flows past, it draws a small, steady dose of liquid or water-soluble fertiliser out of the tank — powered by water pressure alone.
There's nothing to measure and nothing to plug in. Setup takes minutes.
Attach the tank to your garden tap with a tap connector, or into your irrigation mainline with a CBV valve sized to your pipe.
Pour in any liquid or water-soluble fertiliser. Pick a tank size that matches how often you'd like to refill.
Turn on the water and set your feed rate. The system doses nutrients evenly, then tops up with plain water when the tank empties.
An adjustable cap sets how strongly the tank feeds — so you can match the season and the plant.
How you connect depends on where you're feeding from.
Any tank works on any property — bigger tanks just mean fewer refills.
The adjustable cap controls how much fertiliser enters the water.
No. The system runs entirely on your existing water pressure, so there's nothing to wire in and nothing to run.
Any liquid or fully water-soluble fertiliser. Because feeding is gentle and even, you avoid the burn risk of heavy granular applications.
Yes — connect to a garden tap with a tap connector, or into an irrigation mainline with a CBV valve matched to your pipe size.
That depends on tank size and feed rate. Larger tanks and slower rates mean longer between refills — many gardeners top up every few weeks.
Tell us about your garden, turf or growing operation and we'll point you to the right setup — or connect you with a local installer.
Get a quote